1 / 8
Pioneer DNK5852 Fader Shaft Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part (DNK5852) for Pioneer DJM series mixer fader.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the plastic part of the Pioneer mixer fader. I didn't find a replacement part at an affordable price, so I made an accurate and workable model for 3d printing. You need to position the model bottom down and use supports. You can use the printing material of your choice, it is advisable to use a layer height of 0.1 mm and a nozzle of 0.4 mm, but you can experiment to increase the speed of printing.