Denon AVR-S760H receiver short foot pad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for the feet on a Denon AVR-S760H receiver (maybe others) to slightly lower the overall height.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 602
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was the first 3D model I created and terribly basic yet incredibly useful to me. I had purchased a Denon AVR-S760H receiver and found it was just a bit too tall for my entertainment center in order to have sufficient ventilation space above the unit. To work around this I opted to lower the receiver by replacing its feet. I created this model to re-use the existing mounting screws and be the correct size to apply some felt pads I had around. I don't have the exact measurements but I believe it reduced the height by 5mm or more. This was with fairly thick felt pads attached, you'd get a bit more space with a thinner pad. I don't recommend going too low as you still want air to flow under the unit. Also, I would advise comparing how far through the new foot the screw goes compared to the original. If the screw is allowed to go too far into the case you could damage the circuit boards.
If you find this to work for a different model receiver please report back what model you installed it on! I'll update the description to include those reported.
Like this model and want to give extra thanks? Consider buying me a beer! https://paypal.me/craigpow