ActiWe WX15 Electric Wheelchair armrest joint
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ActiWe WX15 Electric Wheelchair armrest joint. It connects the armrest to it's lower support.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution
My daughter's ActiWe WX15 Electric Wheelchair armrest joint broke, so I made a replacement. (See picture for part).
The old part seems to be made of delrin, but not really sure why it broke. It appears to have been subjected to tension strain, but the way the part is installed, I'm not sure how it happened.
Because of where it broke, I recommend printing horizontal to avoid layer lines at the break point. I printed it with 4 perimeters, 80% 3D honeycomb infill, with organic supports.
Should It break again, I'll update the post with additional tweaks.
One picture shows the part location. The other picture shows the unbroken part from the other side, a test print (yellow), and the broken part.
The part is connected on both ends with machine screws and locking nuts. Pretty easy and obvious replacement.
CAD design is at OnShape