Tea-Lighthouse 4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of a lighthouse that has a spot for a tea light to be placed in the top.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 152
- Wydruki
- 1
- Wyświetlenia
- 703
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a model of a lighthouse that has a spot in the top where a tea light can sit. This allows light to come out of the top of the lighthouse. The tea lights that I used have a base diameter of 1.4in and a height of 1.6in.
To make a rough, more realistic surface add a fuzzy skin modifier to parts 1 and 4; change the “Fuzzy skin thickness” if you want to change how it looks.
For the clear window at the top I used clear PETG. Print this in vase mode with a .45mm layer height and the cooling fan turned off.
Use superglue to attach models 1-4 and 5-7, or you can leave them all separated. All of the models have alignment pieces so they should all align together.
This lighthouse is modeled after Fort Gratiot Lighthouse in Port Huron, Michigan.
Tea-Lighthouse 1: https://www.printables.com/model/563722-tea-lighthouse-1
Tea-Lighthouse 2: https://www.printables.com/model/563735-tea-lighthouse-2
Tea-Lighthouse 3: https://www.printables.com/model/563740-tea-lighthouse-3