1 / 3
Bed Handle for Ender 3 S1, works with included M3x6mm Screws — zdjęcie 1
1 / 3

Bed Handle for Ender 3 S1, works with included M3x6mm Screws

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A handle to pull the print bed.

Ocena
5 / 5
Polubienia
30
Pobrania
257
Wydruki
3
Wyświetlenia
1501
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This model prints without supports, does not need a lot of infill (I think I used 10-15%) and works with the screws that come with the printer. You can use the extra M3x6mm Socket Head Screws that come with your 3d printer. (It is enough to use 4 screws for mounting the extruder, and you should have 6 of them in total)

If you want to use different screws, you can adjust the model to fit your needs (I included the STEP file for this). I think this works with the Ender 3 S1 Pro as well (seems to have the same bed dimensions).

Here are the dimensions, in case you want to change something or create your own model:

  • The handle itself has a height of 4mm, the screw is around 6mm
  • The bed is ~3mm thick, so 7mm screws could be problematic
  • Each screw hole of the handle has a diameter of 3.3mm (to account for tolerances)
  • Distance between the two holes (from their center) is 64mm

Some things to be careful about:

  • There is no end for the screws (if you screw them in too far, you will damage your bed)
  • PLA starts to deform around 52°C, therefore it is recommended to print the model in PETG or ABS

 

Here is a list of other models for the bed:

 

Tagi