M4-Tactical Accessory for Lucky 13
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lucky 13 M4-Tactical Accessory, remixed from sozo13's AR15. Foregrip is Lucky 13 (soozafone) compatible.
- Ocena
- 4,8 / 5
- Polubienia
- 67
- Pobrania
- 445
- Wydruki
- 5
- Wyświetlenia
- 1728
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I'm very new to modeling/printing so I thought I'd start with something simple geometrically - after printing a Lucky 13 figure I saw some useful learning opportunities.
I used sozo13's AR15 as a base using the pistol grip and stock, then modeled new things on top of the receiver. New magwell, magazine, foregrip, shroud. No optics since the top of the model is used for bed adhesion.
Printed on a Prusa Mk3S with no brim @ 0.15 mm in PLA with no issues.
Foregrip is sized at 3.8 mm to accommodate Lucky 13 hands but not too tight - so that you could potentially pivot it in the hand easily when posing. Main pistol grip is unchanged and is modeled from the original Lucky 13 pistol (included with original creation); it is fully compatible in my experience.
My make photos also feature the JPC Plate Carrier created by GearGrease
Enjoy!