RAZOR TRAVEL CASE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RAZOR TRAVEL CASE
- Ocena
- 4,909 / 5
- Polubienia
- 147
- Pobrania
- 480
- Wydruki
- 10
- Wyświetlenia
- 2234
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Are you tired of explaining your wife why you spent the money on a 3d printer?
I do. Since she is responsible for the luggage when we go on a trip, I wanted to make her happy. And I did it :)
Suitable for 5 blades razors or smaller.
#happywife
PET-G is recommended.
3 perimeters, layer height 0.20 mm.
No supports needed (but you may need to use a slower print speed on the Upper part in order to help bridging).
For a better look use Top fill pattern “concentric” or “Hilbert curve”.
Bottom layer will look good if you have textured sheet. If not, also use “concentric” or “Hilbert curve” for Bottom fill pattern
To highlight a text you can apply the "color change" command to a specific layer.
CAUTION: At the end, wait for the print to cool down before taking it off the sheet, so as not to damage the flexible part (living hinge).
I have attached two STL files.
A simple one, which needs you to add a modifier in slicer and then apply "fuzzy skin (outside walls)" for a better grip on the handle, as shown in the picture.
The second file already has a texture on the handle, for those who don't want to get complicated with settings in the slicer program.