1 / 1
The Big Boy - ITX PC CASE
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D Printable PC case, ITX, AIO, GPU, free .step files.
- Ocena
- 5 / 5
- Polubienia
- 468
- Pobrania
- 2009
- Wydruki
- 4
- Wyświetlenia
- 19 135
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (16)Wydruki i komentarze (Wydruki: 4) (Komentarze: 57)Remiksy (4)Kolekcje (523)Powiązane
I have a full build video on YouTube showing the entire build process from start to finish, as well as some tests. Check it out here:
PC Components used in this build:
- Intel Core i9 10900k CPU
- ASUS ROG B460i LGA 1200 ITX motherboard
- Gigabyte 3070 Gaming OC
- NZXT z53 240mm AIO liquid cooler -
- Kingston A2000 250GB + 1TB m.2 SSD.
- Corsair 300mm PCIe riser cable.
- CoolerMaster v850 SFX power supply. (850w)
In addition to the printed parts you'll need the following hardware:
- 12x - M4 machine screws. (length 10-15mm)
- 12x - M4 brass threaded inserts.
- 4x - M5 machine screws + nuts + washers. (min length 40mm)
- 16x - Computer fan screws. (min. 4 should be black, and are usually included with the fans)
- 4x - Motherboard standoffs and mounting screws.
- 4x - 5x30mm flat head wood screw. (25-40mm length is OK)
- 4x - 8x3mm Neodymium magnets.
Tools required to build this case:
- Philips head screwdriver.
- Soldering iron (or other way of heating up threaded inserts)
- Super glue (or other glue that sticks to plastic)
Don't hesitate to ask if you have any questions and I'll answer them to my best ability, usually I reply fastest in the YouTube comments as I check those regularly, but it's also okay to ask here but it might take longer to get a response.