Buster Sword (FFVIIR) - No Paint Edition (Multiple Extruder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable Buster Sword from FInal Fantasy VII Remake. This remix avoids need for painting by making it use dual extruder
- Ocena
- 5 / 5
- Polubienia
- 135
- Pobrania
- 981
- Wydruki
- 9
- Wyświetlenia
- 6131
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
I remixed Cloud's Buster Sword to avoid needing to do any painting after assembly. The sword ends up being 170cm long when completed.
There is room for a M8 threaded rod and nuts through the handle, the parry guard, and a bit of the blade in the cut version for some added strength. I could not find a M8 threaded rod, locally, and a 5/16 in. threaded rod, and bolts, worked great. I just had to cut the rod, with an angle grinder, to size.
Blades 1-3 used prusa's color painting, however, the detail does not stand out terribly well on my sword, so I would recommend removing this feature if you end up using filaments that do not contrast enough.
For the blade I used Overture PLA Grey, Edge's I used Galaxy Grey PLA Prusament, and the handle is Hatchbox PLA brown.
TinkerCad link for Blades 7-9: https://www.tinkercad.com/things/0np68cixdlu-buster-sword-mmu-blades-7-9
Supports should already be handled by the 3mf files. I printed everything in .2 mm layers.
Looking for the Materia Wall Mount featured in the photo? It is available here: https://www.printables.com/model/582637