Fingertip Lightweight Razer orochi v2 pcb 23-27g wireless mouse UPDATED VERSION
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a new version of my previous design with much-improved clicks with inspiration from optimum tech on YouTube
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 133
- Wydruki
- 0
- Wyświetlenia
- 3214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an ultralight mouse - 23g - based around the Razer Orochi v2 PCB with inspiration from the design by Optimum tech as well as the Zaunkoenig v2:
https://www.youtube.com/watch?v=xvz8KjCpdLE
I used the following models as reference for the pcb
https://www.printables.com/model/387351-orochi-v2/files
This design has around 0 flex when squeezing the side grips which was the main design goal
The left click can now be secured with some superglue
Tools:
sandpaper
ph0 screwdriver
box cutter
3d printer
Materials:
sandpaper/grip tape
Double-sided tape
https://www.ebay.co.uk/itm/254861885781 1.5v cell holder lr44
You could use this guide to make use of a rechargeable battery but I simply connected a 1.5v lr44 cell to the positive and negative terminals of the Orochi which are the topmost pin of the JST connector for positive and the bottom pin for negative.
https://www.ebay.co.uk/itm/254861885781 1.5v cell holder lr44
https://www.reddit.com/r/MouseReview/comments/p6xi9l/orochi_v2_advanced_mod_guide_with_modkit_jst/
But, 1.5v cells die extremely quickly so you could also use 3v 2032 rechargeable lithium button cells instead if you don't mind the +5g from the battery and voltage step-down board
https://www.aliexpress.com/item/1005003112762903.html?spm=a2g0o.order_list.order_list_main.11.125818024q3Dr5 voltage steppers
https://www.ebay.co.uk/itm/283117054906 battery holders
to attach the switches and the support beam I heated up my 3d printer and manually extruded roughly 20mm of filament and by using the extruder like a welder fused the plastic together. The more you mush the nozzle into the part the stronger the joint between the base and the reinforcement beam will be
The 1.5v cell holder is just hot glued/double-sided taped to the top of the brace
I simply used double-sided tape and sandpaper for the grips
You can use any small mouse skates
print with .2 layer height
The first layer is very fragile so I recommend printing with a build plate that self-releases when it cools down