1 / 6
Center Axle Mod for Mr. Baddeley's Mark III Astromech
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I quick upgrade of the Center Axle Design. I ran my R5-D4 into a misaligned elevator and broke the stock axle. This…
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 405
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (22)Powiązane
I quick upgrade of the Center Axle Design. I ran my R5-D4 into a misaligned elevator and broke the stock axle. This addresses that issue, The pictures show two sets...One set for each of my droids. I used the US equivalent of M4 bolts that were 4 inches long (10-24 with washers and nylock nuts).
Category: Robotics