R5-D4 Eyes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
https://youtu.be/53ITSdmS0Xk I used Adafruit NeoPixels to light up my R5-D4 eyes. The video shows a simple strand…
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 252
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I used Adafruit NeoPixels to light up my R5-D4 eyes. The video shows a simple strand test. when I complete the Arduino sketch, I'll have different moods and events for the eyes (Happy, Sad, Surprised, Angry, Scanning, etc). I used Fusion 360 to design the mounts for the NeoPixels and got 6 and 10 mm glass cabochons from Amazon for the lenses. The main eyes each have a door peephole device. The dome is a Mr. Baddeley design.
BOM
R5-D4 Eyes BOM
https://www.thingiverse.com/thing:3712394
10mm Glass Cabochons (3)
8mm Glass Cabochons (1)
6mm Glass Cabochon (1) https://www.amazon.com/gp/product/B01F8S0WN8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Heavy Duty Door Viewer Satin Nickel https://www.amazon.com/gp/product/B01BXD3BGM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Adafruit Breadboard-friendly RGB Smart NeoPixel - Pack of 4 (2) https://www.amazon.com/gp/product/B00ULID31E/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Number8 Wood or Sheet Metal or SelfTapping Screws 3/8inch (6) https://www.mcmaster.com/99461a340
Number6 Wood screw 3/8 inch (10) https://www.mcmaster.com/90031a146
Print Settings
Printer Brand:
Lulzbot
Printer:
Mini 2
Supports:
Yes
Resolution:
.2
Infill:
20%
Filament:
Amazon Premium PLA PLA
Notes:
I printed the eyes with the threads on top. I used the "cooling tower" to make sure the long eyestalk did not overheat and turn to goo doing the long vertical print.
Category: Robotics