1 / 4
Mini Maglite Holster
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mini Maglite Holster Features: Full body enclosure (sink model below the build plate for a shorter enclosure)…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 114
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Mini Maglite Holster
Features:
- Full body enclosure (sink model below the build plate for a shorter enclosure)
- Integrated catch to keep the Maglite inside (Demo: https://youtu.be/Ymsswnr9_-4)
- Clip for hanging on belt or pants
- Thumbhole to allow Maglite to be turned on inside the holster (Finger Hole STL)
Note: The finger hole version has not been printed yet
Used TinkerCAD and Blender to add/subtract and polish the model
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
Yes
Resolution:
0.2-0.28
Infill:
20%-25%, 3-4 shells
Filament: Hatchbox PLA Black
Notes:
Set support angle to 46 degrees or block out the supports inside the clip. Supports are only needed for the bottom of the clip and optionally for the catch (See pictures)
It is possible with a brim but I still had adhesion issues due to the height and thus leverage. Raft is recommendedCategory: Tools