Voron 0.2 Tophat Extender 15mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This extender parts is integrated with the top clip
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 96
- Wydruki
- 1
- Wyświetlenia
- 1096
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I tried other "K Extrusion" extender, but I stressful due to the wobbly of the "K Extrusion." So, I design my own solution.
This 15mm extender part is integrated with 'th_top_clip_x4.stl' and can be securely fastened with screws using 'th_side_clip_x4.stl' onto 'K Extrusion,' allowing for a stable assembly without any wobbling. and for me, another important thing is to ensure it doesn't affect the appearance.
The additional screws you need are only four M3x10mm BHCS; there is nothing else required.
Print Settings:
- Material: PETG
- Layer height: 0.20mm
- Perimeters: 3
- Supports: Yes
My other Voron 0 mod parts:
https://www.printables.com/@BaGooN/collections/1215263
