Chris Park Carbon Fiber Cane Top
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement screw in top for a Chris Park carbon fiber telescoping can
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My sister in law is legally blind and uses a white cane when she has to move around in public. She mentioned that the screw in top of one of her Chris Park Carbon Fiber canes came out and was lost and could I possibly make a new one.
Challenge accepted.
And now I share this for anyone else who may find themselves in the same need.
I have no idea how long the original one was, but I suspect that it probably had maybe 3 or 4 full revolutions of thread, thus could back out and get lost. So I made this one go down as far as the inside threads would allow without interfering with the telescoping sections. So one will have plenty of notice before this one backs out and is lost.
Specs are a M16 x 1.5 thread. I printed them out of PLA, but PETG would work just as well.