Replacement Hubcap - HD Ruffino - 2012-2022 F150
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A friend had a broken hubcap on his truck, and I thought, I can fix that...
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 170
- Wydruki
- 0
- Wyświetlenia
- 1249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Not the most gentle enviroment for a 3d print, so I needed to think about sun exposure, rain, roadsalt, g-forces, stone chips, etc in the design and filament, but the outside needed to look perfectly like the others, as you'd see two of them on the same side.
In the pic the replacement is on the left with the original on the right.
PETG, 8 perimeters, 0.2mm layers since there are shallow angles involved. About half a kilogram of filament in there, 21 hour print time on the MK3S+. The text is actually coloured in with metalic silver Sharpie marker, which has held up quite well. and he has had it on his truck for a while now and it's still going strong, no problems at all.
Pretty happy it turned out so well and is holding up to the challenges of the road.