1 / 3
LK150 Wax Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a way to use the small wax discs that I have for my metal bed Brother machines on my LK150 mast. This holder fits over the horizontal bar on the mast head, in front of the tension disks. The yarn passes over the top of the wax, on the outside of post. For heavier waxing you can run the yarn under the wax.
Print Settings
Printer:
Klic N Print 3D (KNP3D)
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
15%
Filament:
Overture PLA MATTEWhite
Notes:
I used supports to print it as oriented. Set the supports to "touching build plate only" . I also used a brim, but that might not be necessary, I just wanted to make sure it didn't warp.
Category: Parts