Lego like Pumpkin Head for Lego-like Skeleton (10:1 scale)

This is my first big design/remix and made to fit the Mega Lego-like Skeleton (10:1 scale) from @JuliaEbert.

https://www.printables.com/model/78695-mega-lego-like-skeleton-101-scale

I found a pumpkin head wich fits lego minifigs and made it to fit the large skeleton, i had to remix the head from the skeleton so it would fit inside the pumpkin and only a face was needed so the rest was left away to safe filament and maybe put a smal electric candle inside it.

Eyes, nose and mouth need a bit of post processing to fit them in but you can also glue them on top of the face.

You can glue the face inside the pumpkin or just slide it onto the neckpiece, it has enough grip to stay in place.

The top lid for the pumpkin and the stem have an arrow wich needs to point towards you when you glue them together.

After glueing the connector pins onto the bottom pumpkin you can just put the top onto it without glue so you can put a small electric candle inside it.

Placing the top wil guide itself because the pins and holes have a patern on them.

Don't force the pins inside the lid of the pumpkin or they might stick trough the outside.

After Haloween take the pumpkin head off and put the regular head onto the skeleton if you like. 

Pumpkin:

 printed with Eryone PLA+ orange, 0.2 layer height, 2 perimeters, infill lines 10% 1 gradual infill step 0.28 infill thickness, tree support touching buildplate.

Face: 

0.2 layer height, 2 perimeters, infill cubic 10% 1 step 0.28 thickness, support normal touching buildplate placement everywhere.

eyes, nose, mouth:

Standing up, 0.2 layer height, 2 perimeters, support normal touching buildplate, buildplate adhesion Brim line count 10

Stem and pins just how you like it.

Edit:

After reading about some problems with the 3mf stem file i also uploaded an stl file of it

Trick or treat, enjoy and leave a like, a comment and some pictures after your build i’ll apreciate it.