Telescope Mounting Bracket for Celestron SCT 6" to 14"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prism Mounting Bracket for the Celestron Schmidt Cassegrain Telescopes 600 up to 1400
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 231
- Wydruki
- 6
- Wyświetlenia
- 901
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Fitting
The mounting bracket for the Celestron 8" Edge HD is printed and tested for fitting.
- 6" SCT confirmed by Jason Soder
- 8" Edge HD confirmed by me
- 9,25" Edge HD confirmed by Andrew vk3bq
- 11" not tested
- 14" not tested
If you confirm the fitting for the other sizes, i will mention you above.
Please check if the radius fits the arc. If you send me the measurements of your telescope, i will render a version for your model.
Printing
Print it standing up, the screw holes to the upper side. That way you get a nice finish.
I'm recommending PETG (or stronger filament) and use at least 20% infill. PLA could be too brittle and melt at daytime in the sun.
Helping
Thank you so much for downloading my model, if you could consider liking my model, i would greatly appreciate it!
Update-ing ;) 11.02.2024:
- Added chamfer to mounting base.
- Added chamfer to ease inserting into the clamp.
- Added alternative model with a thicker mounting base. You will need longer screws to attach it.