1 / 3
Logitech X55/56 - Ikea Poang Mount - Remix little more spred — zdjęcie 1
1 / 3

Logitech X55/56 - Ikea Poang Mount - Remix little more spred

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I remade the original model to be more speeded and easier to install with my modifications.

Ocena
0 / 5
Polubienia
12
Pobrania
24
Wydruki
0
Wyświetlenia
457
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial

A modification to the Sawyer42 - model. It makes a more wide placement for joysticks. It can be changed, by “shrinking” the middle bar. 

Here it has 200 mm, 5cm form either side is used to be placed inside on chair arm brackets.   

With this modification, you have to use nuts and bolts. 

For ONE side you need:

Joystick mount (If you are able to find I would recommend black color):
- 4x M4 60mm bolts
- 4x M4 nuts
- 4x M4 washers

“Undercarage”
- 8x M5 20mm bolts
- 8x M5 20mm nuts

This is designed to be able to use a bracket for M5 screw.


CAUTION: The tops of the bracket may be sharp, please sand down, blunt them, or be careful when sitting. 

 

Printer Brand:
Prusa

Printer: 
Prusa MK4

Rafts:
No

Supports: 
Yes - depending on the model and placement.

Resolution:
.2

Infill: 
25% -brackets and mounts, 75% - Middle bar

 

Chair, Vr Headset, joysticks, bolts, springs, nuts - not included
 

Tagi