Mackie Mixer Small Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small replacement knob for Mackie Mixers. Based on knobs from the Mackie 1402-VLZ.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 463
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
I was looking for a 1:1 replacement of the original knobs that were missing on this used mixer I bought. I couldn't find the models anywhere, so I created one myself by measuring the original knobs.
Because of their small size I printed these with 100% infill. I did not need any supports for the tiny protrusions on the inside that grip the potentiometer shaft and hold it on. It is supposed to be a snug fit. If you push it all the way on the inside will probably deform a bit, which is by design.
I printed this upright at layer height 0.12 mm.
To facilitate remixes, here is the onshape model link.