Ankermake M5C LED Light Bar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LED light bar for Ankermake M5C
- Ocena
- 5 / 5
- Polubienia
- 69
- Pobrania
- 313
- Wydruki
- 2
- Wyświetlenia
- 2222
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Light Bar for Ankermake M5C. Inspiration from Dean_62 for the model for Ankermake M5. I basically remixed the whole thing. The mount was too small (apparently the crossbar is bigger on the M5C and the light bracket was also modified due to using a different light bar. Made it straight to accommodate the filament spool. The curved one was in the way, you could remove the spool just a little tricky.
Amazon Link: https://a.co/d/4PWOB03
Revised for a version 2. Mount facing the back so light or bracket is not in the way of the wire when the Z goes too high.
Two versions now one V1 for the front and V2 for the back.
Print setting
.4 nozzle
.25 layer height
2 walls
10% cubic infill
PLA
500mm/s
DON'T FORGET TO PRINT IT TWICE!