Peak Design Capture - Compatible Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder similar to Peak Design Capture and compatible with Peak Design plate.
- Ocena
- 0 / 5
- Polubienia
- 139
- Pobrania
- 220
- Wydruki
- 2
- Wyświetlenia
- 2335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For the printed model, it's necessary to insert a spring from a pen. It can be printed in one piece and without supports. I recommend PC Blend Carbon Fiber or a similar, more durable material.
The backcover uses the 1cm-uni-mount system, which consists of two holes spaced 1cm apart, allowing you to easily attach a different type of holder and thus create your own combination of connections.
See more at
https://www.printables.com/search/models?q=tag%3A1cmunimount
I use Prusament PC Blend Carbon Fiber. 0.15mm Structural, 4 Perimeters, 10% Gyroid infill.
Once printed, simply press the button; it clicks and releases. Put the pen spring inside and that's it.
The video on how to finish preparations after printing is here