Donation box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had the need for a donation box and I wanted something clear-ish, but secure and reusable.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
So the hexagons are smaller than euro coins, they will stay in for sure. You can also use bank note, the opening is large enough for that. You can secure it easily with just two plastic collars that will ensure no one will temper with the box, and you can just cut it at the end of the day. I didn't wanted something with a padlock 🔐 'cause I would loose the key for sure at some point …
You can print it in PLA, I used the royal blue from Prusament.
Printing
PLA 15% infill, 0.20mm speed.
Overall, the printing time is like … LONG. Like printing over a weekend long 🥲
| Top | Base | |
| Prusa Mini / Mini+ | 5h26 | 22h24 |
| Prusa Mk4 Input Shaper | 2h43 | 9h31 |
Looking for commercial license? Checkout my membership page