1 / 4
Bento mini v1 cradle / hanger for Qidi X-Smart 3 Printer — zdjęcie 1
1 / 4

Bento mini v1 cradle / hanger for Qidi X-Smart 3 Printer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Extra mounting hole added and positioned off centre to allow mounting to the frame on the Qidi X-Smart3 printer

Ocena
5 / 5
Polubienia
23
Pobrania
83
Wydruki
1
Wyświetlenia
1064
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Extra mounting hole added and positioned off centre to allow mounting to the frame on the Qidi X-Smart3 printer (using a BHCS M3x8mm screw)

Using the fans recommended in the original post

24V Dual Ball Bearings 6028 fans from GDStime on Aliexpress. 

I need an fan extender cable and then attached the fan to the board header Fan 2 this can be turned on and off when need in the Fluidd Interface

Two Bento Mini Boxes can be fitted using an LT-422 Wago style connector https://www.aliexpress.com/item/1005005075908764.html

Tagi