1 / 3
Ubiquiti UVC-G3-Flex Camera Styrofoam Wall mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter that allows a sturdy mount of a G3 Flex camera to a styrofoam insulated house wall.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 348
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Why?
I had to mount these cameras on a building that is insulated with Styrofoam (this probably has a more accurate translation) - one can't just drive a screw into that, instead a special “screw” needs to be used (I used a “Fischer FID 25 x 50”). The camera in the PWM case (bought separately) had no mounting option for those.
Features
- Allows to securely mount a G3 Flex camera in a PWM case to a “soft wall”
- Takes a CAT6 ethernet cable
- Simple and fast to print (0.3 Layer Height)
- No Supports
- Guides the ethernet cable down from the wall, preventing water from being guided inside the wall
Print settings
- No supports (poke, cut or drill the screw holes out after printing)
- Use a UV resistant material - I used PETG, PLA is not recommended due to it's "give"
- 0.3 mm layer height
- 0.45 mm wall width
- 15% infill
Bill Of Materials
For one mount you'll need:
| Item | Qty | Description |
|---|---|---|
| Fischer FID 25 x 50 | 2 | |
| Screw that can go into the Fischer (i.e. 4mm wood screw) | 2 | |
| DIN 912 M3 x 12mm | 2 | |
| Heat inserts M3 x D4.6 x L4.0 | 2 | Ones that are L5.0 or D5.0 should work al well |
| uvc_g3_flex_mount_cap | 1 | Printed |
| uvc_g3_flex_mount_base | 1 | Printed |
Source
Onshape (made the original part in Fusion, tried to transition but got back to Onshape fast)