ESP8266 project box for BME680 ESPHome
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The box will work for pretty much any ESP8266 project, it's designed around the ElectroCookie 1/4 solderable prototype…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 1010
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
The box will work for pretty much any ESP8266 project, it's designed around the ElectroCookie 1/4 solderable prototype board.
The board mounts to the box with M2x5 screws
The magnets are sized for 2mmx5mm Neodymium. Make sure you get the polarity right when gluing the magnets to the box... ask me how I know LOL
The ESPHome code for the BME680 sensor is at https://github.com/withanhdammit/ESPHome-BME680
Print Settings
Printer Brand:
Anycubic
Printer:
Kobra 2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2mm
Infill:
n/a
Filament: Any PLA/PETG/ABS White
Notes:
I've included a file for resin printing as well, with vents along the bottom edge to prevent suction cupping. It will still have a small suction cup effect for the magnet spots on the box, it hasn't affected the prints for me.
How I Designed This ===================
Built in Fusion360
Category: Electronics