Coffee Cup and Phone holder for Pram or Stroller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple Coffee Cup holder for a pram/stroller with optional space for a wallet or mobile phone
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 144
- Wydruki
- 0
- Wyświetlenia
- 2131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
A simple Coffee Cup holder for a pram/stroller with optional space for a wallet or mobile phone.
I used M6 threaded rod with nylon lock nuts for the clamp pivot, locking nut and bolt to attach cup holder to clamp. Inbuilt threads are M6 x1. Threaded rod requires gluing into knob.
If using ¼" threaded rod, drill out the modelled M6 threads and use a ¼" nut instead place.
Clamp is designed to attach to a ~30mm or so handle.
Recommend using PETG, ASA/ABS or other heat resistant material if carrying hot drinks. But ensure the material has decent layer adhesion if putting a strain on the cup.
Printed with supports with 0.2 layer height and 4 perimeters.
STEP files attached if you need to adjust to your particular needs.
Still a work in progress to get it right.