Fully Printable P1Touch Mount for P1P/P1S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully Printable P1Touch Mount for P1P/P1S
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 628
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I didn't have any screws or glue on hand for this one, so I decided to make one that didn't use any.
Assembly:
All parts slide together, no glue or screws required. Part 1 requires some force to slide to Part 2, I was able to do it by hand with relative ease. Parts 2 and 3 slide freely, but the weight of the wire holds it in place fine.
Printing:
Only part 2 requires supports, as shown in the slicer image. I found regular supports to work best, but my final print used tree supports and with a very small amount of clean up with a box cutter was good to go.