1 / 6
Pokeball 6x3mm Magnet Lower
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added cutout for 6x3mm magnets to the base, bottom, and energy.
- Ocena
- 4 / 5
- Polubienia
- 9
- Pobrania
- 70
- Wydruki
- 1
- Wyświetlenia
- 532
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (1)Kolekcje (11)Powiązane
Added cutout for 6x3mm magnets which is what I have a lot of. The ball will self align if it has magnets too and can also spin freely while staying level.
Update 22-09-2023:
After quite a lot of testing I have included my remixed models for the bottom out and energy bottom.
I found that gluing a magnet to the “bottom out” piece first and using that to insert a magnet in the base worked quite well to ensure polarity. After you have made one ball with magnets any following balls are much simpler to to make.