CMS battery module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Module for my standardized circuit mounting system CMS for batteries and other stuff
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is my attempt at making a standardized system for mounting common modules to your projects.
It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get some traction and some remixes with other modules, that is why I've left a template to make new ones.
The idea is to make a grid of 27mm squares with 4mm holes in the center, all these modules can then be mounted onto it with either m4 screws (that can even be 3d printed, I've included the model) or m3 screws and brass inserts.
This specific module is meant for batteries, there are multiple sizes, to make it customizable I've divided the bottom part from the walls, you will have to place them in the same spot in the slicer and change the z for the walls to fit your needs.
In the files, you will find multiple versions of the same module, the ones with an S before the name have pegs that make it possible to use just one screw.
You can find the template, the screws or other modules here: Circuit management System CMS Collection by Agasa's Workshop | Printables.com
All the details are in a video I've made here: