1 / 15
Dell Monitor Stand(FFT-ZS) VESA adapter (UP2516D, UP2716D, U2717D)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
for UP2516D, UP2716D, U2717D
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 1006
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (12)Powiązane
This is an adapter that converts a DELL monitor stand into a VESA stand.
Compatible with stands labeled “FFT-ZS”.
Please let me know if you can use this model other than those listed below.
- UP2516D
- UP2716D
- U2717D
Print setting
Layer Height: 0.2mm
Around the fixing hole: 100%infill
Other: High infill rate
no support
I printed with ABS-CF 0.6 nozzle 50~100%infill.
Remove the bridge from the three central holes after printing.
Required parts
M4L8 screw ×3
M4 washer(4-10-0.8) ×3
M5 washer(5-12-0.8) ×4