1 / 6
GPS-Dome for Quadrocopter with FC 30.5x30.5 footprint (OpenScad, parametric) — zdjęcie 1
1 / 6

GPS-Dome for Quadrocopter with FC 30.5x30.5 footprint (OpenScad, parametric)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fully parametric GPS or FC holder for many different usecases and quadcopter designs

Ocena
0 / 5
Polubienia
0
Pobrania
19
Wydruki
0
Wyświetlenia
147
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Small GPS-Mount to fit on top of a FC with standard 30.5 x 30.5mm footprint (CC3D, Naze32, Flip32). An additional "2nd level plate" can be glued in to place GPS or other components in between the FC and the top cover.

Many dimensional parameters are customizable. Support structure can be switched on/off.

Optional intermediate level plate should be fixed with some drops of CA glue to the 4 screw domes.

Is use this to fix a 808 keycam on top of my FNQ220 and another version to place a Ublox GPS module on my X525v3 quadcopter.

Category: R/C Vehicles

Tagi