8-LED Neopixel Stripe holder (OpenScad), 2 mount versions, fully parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holding frame for Neopixel 8-LED Stripe with 2 different mounting systems to choose (on-top or below plate mount).
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial
Holding frame for Neopixel 8-LED Stripe with 2 different mounting systems to choose (on-top or below plate mount).
I use this in different version on my quadcopters with a standard Neopixel stripe (e.g. available from Adafruit). Neopixel PCB dimensions are defined parametric in the Openscad source code, so it's easy to adapt it to different types...
Space for a 3-wire cable is provided, the cable is to soldered at the given solder joints on the back of the Neopixel stripe.
The mounting type can be switched and adapted in OpenScad source. As provided it fits to my Diatone FPV 250 Quad with 28mm fixing hole distance.
Category: DIY