19" rack Power Distributor mod - Power meter Keweisi, power switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple module for BOWI 19" rack 1.5U power distributors, for Keweisi KWS-AC300 power meter
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 906
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I have found rack19" power distributors, made from aluminium profile (pic here) and slide-in modules - in my was 3x 3sockets module, and power-switch.
Because my distributor have 2 sockets damaged - I trow 3-socket-module and make power-meter-insert (for Keweisi KWS-AC300 power meter, from aliexpress)
Because in markets you can found different powerdistributors from this system (without power-switch, with 8 sockets, with C13 sockets, etc) I made different inserts - for classic 22mm power-buton, for 18mm switch, for rectangle rocker switch, and without switch (smaller one, like 2 sockets)
Printing - printed from PETg, face down, with support (from PLA if you have multimaterial printer) - sample file for orcaslicer included