PVS14 Spycamera Mount w/ Reinforced Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted the arm to have a little more material to stiffen it. I have been using two pieces of 1/2" wide 3M VHB tape to…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 425
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Wanted the arm to have a little more material to stiffen it.
I have been using two pieces of 1/2" wide 3M VHB tape to attach the camera module and and cable to the mount. That seems to work well enough so far.
Some of the tube will be cut off due to the camera being off center, but it is not too bad and mostly is not too intrusive. If requested I can mess around with making the arm a little longer to make the image more centered.
I have tested it so far with Nocturne, Steele Industries, and Cold Harbor lens Protectors. It fits just fine, if you are not using a lens protector it fits a little better, but with a lens protector you will just have the camera pushed up against the protector. I may modify the file if I start noticing scuffs on my protectors.
Category: Sport & Outdoors