Cure station for resin printed parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
experience in solding and elektricity.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 220
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Printer: FDM
Material: PLA
Layerhight: 0,3
Infill: 10%
Walls: 3
Support: for Gallow outer part
Standard parts:
DIN EN ISO 4762 - M3x6 → Motor 1x
Standard 3mm UV LEDs → Gallow inner part 8x
Slow turning 7v DC motor
Power adapter ca. 3,7V
Toggle switch
You can screw the bolts directly in the plastic, but i recommend to cut it first with a tab.
Gallow outer part is glued to the main body, the inner part is friction fitting in the outherpart.
The plate is also friction fitting to the motor, the screw isnt necessary.
If you use 3,7V power adapter you dont need any resistances, the motor is obviously slowed down by 50% but this isnt important.
DISCLAIMER: please be aware that you working with electricity. Electric fire, electric shock and so on.
Ps. ignore my shity cable management ;)