Oral-B Toothbrush Head Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple stand for Oral-B toothbrush heads. I made a 2nd version with little arms to hold aligners or retainers.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
My Oral-B heads get gross inside if they are left on the toothbrush itself. The little device that came with it doesn't drain them well and took up a lot of space. This small stand lets the toothbrush head drain well.
I printed this in PETG because that's what was in the printer. I used 15% infill and 3-layer perimeter minimums. Print it with the back down on the plate and it won't need any supports. The only overhang is a 45 degree chamfer which prints fine.
It could probably benefit from having something heavy glued to the bottom, or it could be attached to a shelf or tile wall easily with some of that thick, clear, gummy tape stuff.