Vertical Stand For Laminated A4 Paper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print stand for laminated A4 paper
- Ocena
- 4 / 5
- Polubienia
- 52
- Pobrania
- 628
- Wydruki
- 2
- Wyświetlenia
- 2166
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
🟩 🟦 🟦 🟪 🟥 🟧 🟨
I needed to display some information at a point of sale quickly, and only really had A4 paper and a laminator available, so I designed a rough stand and used it for the display and then came back to refine it a little.
This stand will likely not work with normal A4 paper. This due to a different width, and the rigidity provided by lamination required to keep the top part of the paper upright when in the stand.
This is designed to fit laminated pouches that measure 216x303mm. I use “Cathedral Products 100 A4 Laminating Pouches” to design this stand, but others of the same size will work. The pouches I mention are available from Amazon in some regions.
If you would like to view the 3D model in colour in your browser and with optional AR, this is available directly at the Shapr3D viewer here.
Printing
This model should be printed in its normal orientation directly on the print bed with no supports. Note that is is 22cm high.
If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee over at ko-fi via this link. Thank you!
🟩 🟦 🟦 🟪 🟥 🟧 🟨