Beer Tap Handle with Passive NFC E Ink Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Short handle for mounting an E Ink display on a beer tap.
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 272
- Wydruki
- 3
- Wyświetlenia
- 3682
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE: I edited the cover model (v2) for improved screw fitment. Increased the chamfer to better recess a common M3 x 8mm flat head. Using this model (purchased from local hardware, not Amazon) in the new image uploaded…
https://www.amazon.com/M3-0-5-Socket-Screws-Alloy-Threaded/dp/B08HNDWFT8/
UPDATE2: Added a non-rounded version (use the same back cover).
ORIGINAL: Lot of beer tap handles, but I liked the appearance of the round model from @wrelsien_105024, but needed to fix a few things. Just needs one small screw to hold the back cover on, one 3/18-16 nut, and a passive eInk display. Not sure what screws I'm using to attach the cover, they're ~3mm c 8mm with a chamfered Phillips head. Using standard 3/18-16 nuts. I'm using Waveshare 2.66inch e-Paper Modules that came with zero documentation. Thankfully their site is pretty helpful…
https://www.waveshare.com/wiki/2.66inch_e-Paper_Module_Manual#Overview
These are sold on Amazon as a 2.7inch model…
https://www.amazon.com/dp/B08B3RG439
Their mobile app isn't easy to find, but their is a link to it on the page for their 4.2in model…
https://www.waveshare.com/wiki/4.2inch_NFC-Powered_e-Paper
The app feels extremely unfinished, but it works well once you figure out the basics. Much easier to create your display images elsewhere and only use the app to upload to the module IMO.
Printing is pretty simple, with no supports needed. I like the way shiny or dual color prints look using the Octogram Spiral bottom/top layer infill patterns as you can see in the pics. Still want to test with some wood filaments but haven't had a chance yet.