Cycloidal Drive - 3D Printed Gearbox 40:1 - Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To have more freedom in rotation, the encoder is being relocated to the back of the gearbox.
- Ocena
- 0 / 5
- Polubienia
- 101
- Pobrania
- 473
- Wydruki
- 0
- Wyświetlenia
- 6495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Cyclodial Gearbox 40:1 with Tarot 4108 BLDC and CUI AMT102 capacitive encoder. Video assembly instruction available!
This is an upgrade to my existing gearbox design…https://www.prusaprinters.org/prints/53681-cycloidal-drive-3d-printed-gearbox-401
Also check my Instagram for more…
https://www.instagram.com/open.the.pod.bay.doors/
To have more freedom in rotation, the encoder is being relocated to the back of the gearbox... Also the motor shaft is being moved and a bearing is added for axis stability.
There are also instructions on how to change the gearbox ratio...
https://github.com/SwannSchilling/Cycloidal-Drive/tree/main
These are the parts needed to assemble the upgrade…
1 x Bearing 60x78x10 mm