Suzuki Vitara XL-7 throttle shaft lever connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for the throttle shaft lever
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 492
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is a replacement part for the plastic adapter mounted on the end of the diaphragm shaft that connects to the lever control arm for the throttle shaft for Suzuki Vitara XL-7 first generation.
This replacement part goes on the end of the metal shaft of the diaphragm that is Suzuki OEM number 1361767G00 and mounts to 1361567G00.
This is apparently a common problem so here's a working replacement part.
The part is made with zero tolerances and most likely won't fit the metal hook out of the box due to inconsistencies in 3D printers.
Use a 3mm drill bit to open the center hole and the groove the shaft rests in if you can't get it in. The hole for the ball joint might require some work to fit as well.
Use a material that can withstand a lot of heat and temperature changes as this is mounted right next to the engine. PETG and ABS got too soft during our testing. ASA might work by PC would probably be the best option.