Fluke 87V and 177 Wall-Mount Brackets with Optional Stud Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Perfectly sized for a Fluke 87V or Fluke 177 using the probe slots on the back. Securely slides on, easily pops off.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 95
- Wydruki
- 1
- Wyświetlenia
- 540
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Needed a set of wall-mounts for my Fluke 87V and Fluke 177. Went through a few revisions so that they slide on perfectly, stay secure without moving, but also pop off easily when you want to remove the meter. Mounting holes sized for M4 screws. Also included a side-by-side mount which I used to hold them between studs, but is totally optional. I've included a photo of the mounting hole dimensions so you can lay out the brackets on something else, or screw them directly into a wall or peg-board mount, etc.
Test leads would be draped over the meter/around the back, etc. No provisions are included for handling leads in a tidy manner - I just leave them hanging, ready for use.
Compatibility with Other Meters:
The diameter of the probe holders and where it's situated on the meter is quite different between the 87V and 177. YMMV on any other meter.
NOTE: I've included the Fusion 360 archive file if you want to modify things, but I didn't make an effort for it to be clearly documented or easily modified.