16mm ball-mount holder for RPi camera casing to be used with Prusalink
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holder is to be used with David's RPi camera casing. The holder replaces Prusa Original MK3S "heatbed cable clip".
- Ocena
- 4,333 / 5
- Polubienia
- 17
- Pobrania
- 124
- Wydruki
- 7
- Wyświetlenia
- 823
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Warning! One user reported a crash between the camera and the extruder. This is a problem if you print big parts using the back/left part of the printer. Based on this report, I would recommend placing the camera away from the printing area to avoid any issue. In my case, I attached the camera against the enclosure.
This holder is to be used with David's RPi camera casing. The holder replaces Prusa Original MK3S "heatbed cable clip". Just remove the original clip and replace it with the camera holder (with the same screws).
I recommend to choose the wide-angle RPi camera for better sharpness of the picture.
The 15cm RPi cable is long enough for the connection between the RPi camera and the RPi Zero.