Shutters - In House Cover Plate Replacement (Parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement of plastic cover for shutter tape inhouse.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
While replacing belt pulley, old plastic cover in house broke :-(
Well, lets replace it!
For this part, I tried to engrave an simplified holiday image onto its surface. Therefore you find two versions of files: one with engraved image and a plane surface.
In photo of printed model, I compared results with different wall height. Bigger value on the left side worked out much better.
Change parameters in file *.scad to match your needs of course. It is pretty simple to do so and generate your own .stl file.
Just get OpenSCAD, load the file, change your settings, press “F6” & then “F7”. Voila, there you have you very own specific cover plate!
Guess, you might want to have a look to this nice Cheat Sheet if you are curious about a fast introduction of its syntax.