Card Game Box (Bang!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a storage box for the Bang! cards game.
- Ocena
- 5 / 5
- Polubienia
- 61
- Pobrania
- 276
- Wydruki
- 4
- Wyświetlenia
- 3750
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a storage box for the Bang! cards game. The included Autodesk file is parametric, so you can edit cards size and box height. The model will change accordingly. Therefore it is possible to use it as a storage box for other cards. There are also two test files included:"Test Schachtel" &"Test Deckel" to check if the printer / settings match the required tolerances.
How to print / assemble:
Title: Print flat and add filament change at according height to change colour.
Bullets: Print vertical with a small brim and add filament change at according height to change colour.
Print with seam at the back side. Afterwards the bullets were sanded at the back to achieve a better surface for glueing.
Ornaments: Sand prints on the top side and glue them with this side down to achieve a clean finish.
Assembly: Glue all parts together as you like.
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: Yes
Supports: No
Resolution: 0.15mm
Infill: 25%
Filament: Prusament, 3DJake PLA Prusament: silver, jet black | 3dJake: bronze, gold, matt red
Notes: Every part can be printed support-free.