Cypher Trapwire/Coin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A prop version of Cypher's trapwire.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 224
- Wydruki
- 0
- Wyświetlenia
- 663
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was modeled entirely within Blender. As such, there isn't much of a sense of scale to go along with it. Scale it how you like in your slicer. It prints without supports perfectly!
Make sure you print a second, can't watch flank without a working trapwire.
The main STL should work for you but if you want more/less detail I've included the .blend with the subdivision surface modifier not applied. The STL included was exported with 4 levels of subdivision, but if that's too much geometry you can change it. I personally printed it with 5 levels but I don't think it'll make a difference on an FDM printer.