Rubber Spatula
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A two part rubber spatula
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 302
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A two part rubber and hard plastic spatula.
The handle can be printed with any hard plastic, and the rubber part should be printed with TPU/TPE or similar rubber filament. (I used NinjaFlex)
-Print the handle first
-Slice the rubber part and add a pause on the correct layer height*, just before it starts printing the bridging in the handle slot.
Also, don't print with supports.
-When the print has paused, just add the handle (oriented upside down to how it was printed) in the rubber slot and resume the print.
Make sure the handle is placed correctly. The step in the front should face downwards which makes the handle lay flat on the printbed when inserted into the rubber.
*To add a pause in PrusaSlicer:
Slice it, go to the 8mm layer height, right click on the little plus symbol and select “add pause print (m601)”
