1 / 2
Snag-free wider washer for Dracula's Tower Puzzle Box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This wider washer will cover the screw coming up from the slider to avoid snags
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 450
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a wider washer for Dracula's Tower Puzzle Box that covers the screw coming up from the slider and provides a flatter base for the puzzle core. It helps to avoid snags on the goodies and things you'll surely put inside the tower!
(Note, the photo is from an older revision of the model, the new one will let the screw sit inside a bit to take up less space.)
Printing instructions
- Print the .stl file as-oriented.
- A brim might help.
Installation instructions
- Drive the screw through the hole on the flat side, as with the original (the tapered end goes down).
- Clean up any loose plastic.
- Attach the washer to the base through the puzzle core, as with the original.