MK3S Front Screen clip-on storage compartment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Storage compartment to clip onto the side of the MK3s screen.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 128
- Wydruki
- 3
- Wyświetlenia
- 1335
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This storage compartment clips onto the display support part, through the (parallelogram shaped) centre hole.
With slicing, I orientated the card slot holes to face up. Set the opposite face to touch the print bed (as shown in one of the pictures). Supports are required for the clips. I printed this with 100% infill at 0.2 (Fast). I wasn't happy with results using low infill.
It's a snug fit but theres a little bit of give on the tongues to let you push it through then lock into place.
I use it to store spare SD cards, lens cap for my raspicam and filament clip.
EDIT: I mirrored this in Prusaslicer along the x-axis and mounted it on the left side of the screen.